OPTIMIX TA33 TILE BOND ENHANCER (TWO-COMPONENT) is a high quality two part polymer modified cementitious adhesive slurry for pre-treating the bonded surfaces of tiles. It is designed to improve the long term bonding performance particularly when installing difficult or high value interior and exterior ceramic tiles.
OPTIMIX TA33 TILE BOND ENHANCER (TWO-COMPONENT) is a measured two component product ideal for use with all Optimix and most proprietary C1 and C2 grade adhesives. It is easy to mix and apply by brush or roller.
OPTIMIX TA33 TILE BOND ENHANCER (TWO-COMPONENT) was developed primarily for use with hard and high density tiles such as fully vitrified tiles and tiles with bonded mesh or other awkward reinforcements but it is also suitable for use on very large format and high value tiles where the cost of failure is high.
OPTIMIX TA80 TILE BOND ENHANCER (ONE- COMPONENT) is a first generation pre-blended polymer emulsion for rapid pre-treatment of the bonded surfaces of tiles. It is designed to form a strong bond to a variety of tile materials to improve the bonding interface with all Optimix and most proprietary C1 and C2 grade traditional cement based tile adhesives.
OPTIMIX TA80 TILE BOND ENHANCER (ONE-COMPONENT) is a ready to use liquid that requires no premixing, is easy to apply by brush or roller, dries quickly and thus is ideal for small or large projects alike. It is suitable for difficult to bond tiles such as fully vitrified, low water absorption or tiles with mesh or other awkward reinforcements. Its simplicity of application makes it suitable for use on all sizes of tiles from small to very large format.
OPTIMIX BA310 Thin Joint Adhesive Mortar (For ALC Blocks) is a high quality cement based water resistant modified mortar designed for fixing of Autoclaved Lightweight Concrete (ALC) for thin joint applications and installations.
OPTIMIX TA313 Tile Adhesive (Semi-Flexible) is high quality polymer modified cementitious adhesive designed for fixing homogeneous tiles, ceramic tiles and stone tiles for interior and exterior applications. The adhesion properties and performance of OPTIMIX TA313 exceeds the requirements of EN12004 Class C1TE with slip resistance performance. This product is available in grey or white colour and certified under "Hong Kong Q-Mark Product Scheme".
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX TA314 Tile Adhesive (2-in-1 Fix and Grout) is a high quality polymer modified cementitious 2-in-1 adhesive and grout for mosaic tiles. When water is added, it produces a smooth creamy paste for fixing mosaics as well as for filling tile joints. It fulfills the requirements of BS EN12004 Class C1. OPTIMIX TA314 is available in a wide range of colours.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX TA328 Tile Adhesive (Flexible) is premium quality polymer modified cementitious adhesive designed for fixing homogeneous tiles and natural stone for interior and exterior applications. The outstanding adhesion performance of OPTIMIX TA328 exceeds the requirements of EN12004 Class C2TE-S1. It is available in grey or white colour. This product is certified under "HKCI Product Conformity Certification Scheme for Tile Adhesive (PCCS-TA)" and "CIC Green Product Certification (Platinum Rating)".
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX TA328S TILE ADHESIVE (FLEXIBLE) WITH ENHANCED EFFLORESCENCE RESISTANCE is a high quality polymer modified cementitious adhesive with special additives which inhibits the movement of free lime and thus reduces the risk of efflorescence. Available in grey or white colours it is designed for high strength fixing of interior and exterior ceramic tiles. OPTIMIX TA328 exceeds the requirements of EN12004 Class C2TE S1.
OPTIMIX TA328S is an easy to mix and apply normal setting adhesive with a good pot life and open time. This allow for simple positioning and adjustment of all kinds of floor and wall tile installations. It has a high polymer content designed to achieve high bond performance and provide additional flexibility. This makes it ideal for larger and heavier tiles and installations subject to some loading or impacts.
OPTIMIX TA338 Tile Adhesive (High Performance) is a high quality polymer modified cementitious adhesive designed for fixing tiles. It has excellent deformation capability and flexibility to accommodate movements due to thermal expansion or contraction of the substrate or tiles. OPTIMIX TA338 Tile Adhesive (High Performance) complies BS EN 12004 : 2007 Class C2TE S2 - improved cementitious adhesive with reduced slip, extended open time and enhanced deformation properties. OPTIMIX TA338S with additional feature of efflorescence resistance is also available.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX SA329 STONE FLOOR ADHESIVE (FAST-SETTING) is a Rapid Setting high quality polymer modified cementitious adhesive available in grey or white colours for high strength fixing of interior and exterior natural stone and ceramic tiles.
OPTIMIX SA329 is an easy to mix and apply adhesive with a good pot life and open time but which sets quickly and gains working strength within 2 hours. This allow for simple positioning and adjustment of all kinds of floor and wall tile installations with the potential for early grouting and quick opening to foot traffic. It has a high polymer content designed to achieve high bond performance and provide additional flexibility. This makes it ideal for larger and heavier tiles and installations subject to some loading or impacts. The adhesion properties and performance of OPTIMIX SA329 exceeds the requirements of EN12004 Class C2FT with slip resistance performance.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX DB390 Semi-Dry Bedding Mortar (Rapid Setting) is high quality pre-mixed, rapid-setting mortar. It is a semi-dry bedding mortar with uniform consistency and can directly replace the traditional low-quality site batched semi-dry cement sand mixes for floor tile installation. It is suitable for both internal and external floor tiling application.
OPTIMIX DB391 Adhesive Slurry (Rapid Setting) is a high quality polymer modified cementitious fast-setting adhesive designed for fixing floor tiles on traditional semi-dry bedding system. It is recommended to use for fixing large floor tiles with OPTIMIX DB390 Rapid-Setting Semi-Dry Bedding Mortar.
OPTIMIX TG410E Tile Grout (High Performance) is a high quality polymer modified mortar designed for filling tile joints. It fulfills BS EN 13888 Type CG2 requirements with high abrasion resistance and reduced water absorption. OPTIMIX TG410E is available in a wide range of colors. OPTIMIX TG410ES with anti-efflorescence is also available.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX TG480 is an epoxy based highly decorative pointing mortar for interior tile grouting and joint filling. The product is supplied in convenient 2-component pre-packed cartridges with automatic mixing at the nozzle.
The nozzle also allows for precise filling of grout joints and avoids overspill associated with trowel installations, plus the grout remains workable for around 90 minutes while any excess grout can be wiped away with clean water for up to 2 hours after installation.
OPTIMIX TG480 achieves a flexible, hard wearing and waterproof finish suitable for vertical and horizontal tiling and can accept full service within 3 days of installation. It is available in a luxurious range of simple pastel colours plus highly distinctive flecked and metallic options to match any architectural preferences.
