OPTIMIX SF806 THICK SECTION (UNDERLAYMENT) is a high quality pre-blended cementitious self-levelling floor screed.
It is specially designed for application thickness in the approximate range of 10mm to 50mm thick.
At the same time it has similar characteristics to traditional self levelling screeds; It is easy to mix and apply at a trowellable or flowable consistency making it ideal for rapid installation of small or large scale projects.
It can be used to correct a wide variation in substrate levels while, achieving a strong, seamless, level surface in preparation for finishes such as carpet, vinyl, tiles, resin-based coatings etc.
OPTIMIX SF818 Self-Levelling Screed (Underlayment) is a high quality pre-mixed mortar consisting of special cements, graded aggregates, selected fillers, polymers and plasticizing additives. When mixed with water, it readily blends to produce a flowable and pumpable mortar for floor screed. It can be applied at thickness between 3mm and 20mm in one operation to provide a levelled and flat floor surface. OPTIMIX SF818 can be applied to all concrete substrates. It is designed to replace the traditional hand applied site mix sand cement floor screed.
OPTIMIX SF828 Self-Levelling Screed (Overlayment) is a premium quality pre-mixed mortar consists of special cements, graded fillers, polymers and chemical additives. When mixed with water, it readily blends to produce a flowable and pumpable flooring mortar. It can be applied at thickness between 5mm and 20mm in one operation to provide a levelled and flat floor surface. OPTIMIX SF828 can be applied to all concrete substrates. It is designed to set and gain strength quickly for early foot traffic.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX SF838 Self-Levelling Screed (Colour) is a premium quality pre-mixed mortar consists of special cements, graded fillers, polymers and chemical additives. When mixed with water, it readily blends to produce a flowable and pumpable flooring mortar. It can be applied at thickness between 5mm and 20mm in one operation to provide a levelled and flat floor surface. OPTIMIX SF838 can be applied to all concrete substrates. It is designed to set and gain strength quickly for early foot traffic.
OPTIMIX SF868 Self-Levelling Screed (Exterior) is a premium quality pre-mixed mortar. When mixed with water, it readily blends to produce a flowable and pumpable flooring mortar for exterior horizontal concrete substrate. It can be applied at thickness between 3mm and 15mm in one operation to provide a levelled and flat tough surface which will accept light foot traffic 4 hours after installation.
OPTIMIX SF878 Self-Levelling Screed (Heavy Duty) is a premium quality premixed mortar consists of special cements, graded fillers, polymers and chemical additives. When mixed with water, it readily blends to produce a flowable and pumpable flooring mortar. It can be applied at thickness between 3mm and 15mm in one operation to provide a levelled and flat floor surface. OPTIMIX SF878 can be applied to all normal rigid substrate. It is designed to set and gain strength quickly for early re-opening to traffic.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX FH919 Floor Hardener is a premium quality premixed powder consists of special cements, finely graded fillers, high quality polymers and chemical additives. It is mainly used to increase wear resistant of concrete floors or slabs. It is designed to be applied by dry-shake method onto freshly laid concrete to form a high strength composite surface layer. With OPTIMIX FH919, both the strength and abrasion resistance will be enhanced significantly. Moreover, the common surface cracking and dusting problems of traditional concrete floor can largely be minimized. Different types of metallic and non-metallic fillers for superior wear resistance are available to suit ultra heavy duty applications.
OPTIMIX F50 Easy Screed is a premixed cementitious mortar specially designed for granolithic screed and floor screed. It is formulated to be low shrinkage to minimize the formation of surface cracks and to provide a level, wear-resisting and long lasting surface. OPTIMIX F50 is used for overcoming common problems of the existing ready-mixed floor screed or site-mixed sand/cement screed including inconsistent drying time, dusting, cracking and debonding.
OPTIMIX FS151 Floor Screed is a high quality pre-mixed cement-based floor screed. When water is added, it readily blends to produce a homogeneous mortar and apply as floor screed over concrete substrate. OPTIMIX FS151 is specially formulated to provide good workability for efficient floor laying applications together with low shrinkage to minimize the formation of surface cracking. It has been designed to provide a materials solution to overcome common problems of slow drying time, dusting, cracking and debonding associated with the existing ready-mixed floor screed and site-mixed sand/cement screed.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX FS161 Floor Screed (Waterproofing) is a premium quality shrinkage compensated cement-based screed product which consists of special cements, fine graded fillers, hydrophobic and chemical additives. When water is added, it readily blends to produce a homogeneous mortar and apply as waterproofing floor screed over concrete substrate. OPTIMIX FS161 is specially formulated to provide consistent quality screed for efficient floor laying applications with outstanding water resistance properties. It has been designed to replace traditional ready-mixed floor screed and site-mixed sand/cement screed with the addition of liquid waterproofing admixture or latex emulsion.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX FS171 FLOOR SCREED (LOW DENSITY) is high quality lightweight cement-based screed and is a suitable base for subsequent wearing screeds, tiling and other trafficable flooring systems.
It is formulated with low density and shrinkage compensating components to achieve a stable installed density of approximately 1200kg/m3 and a compressive strength of around 8 to 12 MPa.
Supplied as a single bag requiring only the addition of water Optimix FS171 is designed for easy trowel-down application.
OPTIMIX FS191 Floor Screed (Insulation) is a premium quality pre-mixed lightweight cement-based insulating floor screed with outstanding water resistance properties over concrete substrate. It is specially formulated to provide outstanding heat insulation properties without the weight of a normal floor screed. OPTIMIX FS191 can replace the traditional ready-mixed floor screed or site-mixed sand/cement screed with the addition of air entraining admixture.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
OPTIMIX FS192 Floor Screed (Lightweight) is a premium quality pre-mixed lightweight cement-based screeding material over concrete substrate. It fully complies with the Building (Minor Works) Regulation Cap 123N Item 3.42 for thickening of floor slab of a domestic flat with solid screed. OPTIMIX FS192 can replace the traditional ready-mixed or site-batched air-entrained floor screed.
This product is suitable for Modular Integrated Construction (MiC) & Design for Manufacture and Assembly (DfMA) projects. Application details and related products can be found on MiC & DfMA corner.
